Procedure
To add the MyGeotab add-in, follow the following steps here: How to add the Geotab Surfsight add-in to MyGeotab
To setup the camera physically, please follow these instructions:
Before you start, make sure that the vehicle is parked on an level surface and that the windshield is clean and dry.
1.Unscrew the safety screws that lockthe tamper proof case using the specialty screwdriver.
2.Insert the SIM and SD cards.
3. Attach the mounting bracket onto the camera.
4. Place the camera as high as possible on the driver's side of the vehicle.
5. Remove the 3M adhesive tape cover, and mount the camera onto the windshield.
Additional Notes
- Surfsight also has an FAQ page that can be found here - Frequently Asked Questions
- If there are any Auxiliary cameras follow the following steps Auxiliary Camera in Vehicle Installation Guide here
Related Questions
- Surfsight Contact info and the support guide can be found Surfsight Support Guide