Procedure
- Click on Assets in MyGeotab.
- Select a vehicle.
- Click on the Settings tab.
- Select the IOX & Auxiliaries dropdown.
- Select the toggle next to Invert input value under the appropriate auxiliary.
- Click on Save at the top of the page.
Additional Notes
The IOX-AUX goes through a reconfiguration process when a device is power reset. It uses a self-learning algorithm to figure out what type of circuit it is connected to. This requires at least 3 ON-OFF status changes.
IOX-AUX can sometimes fail to calibrate itself correctly and end up reporting inverted AUX states.